| Specialist Oils And Greases - Condat |
 |
| |
| Specialist Oils, Greases, Sealants and Ground Conditioning Products. |
| |
| Now viewing: Product List |
|
|
 |
|
|
| Condat has developed a complete range of Biodegradable and Fireproof products for the Tunnelling industry. |
| |
 TAIL SEAL GREASE (Application: Tail Seal) |
| |
- WR 90 S
- WR 89
- WR 89 S
- Condat Emergency Seal
| |
| WR 90 S - Biodegradable and Fireproof |
| |
| Used as first filling, it is applied to the brushes at the start of the drive. |
| |
| WR 89 - Biodegradable |
| |
| Tail seal grease compound continuously injected between the rows of brushes and thus maintaining a seal between the shield and the ring segments. |
| |
| WR 89 S - Biodegradable and Fireproof |
| |
| Completely fireproof tail seal grease compound continuously injected between the rows of brushes and thus maintaining a seal between the shield and the ring segments. |
| |
| Condat Emergency Seal |
| |
| Application : Emergency |
| |
| This product is injected instead of WR89/WR89 S to stop water ingress in case of damaged brushes. |
|
 |
| SEALING COMPOUND (Application: Main bearing of the head / Articulation of the shield) |
| |
| HBW - Biodegradable |
| |
| This sealing grease is specifically designed to prevent water and pollutants from reaching the main bearing. It has excellent elastic properties and at the same time lubricates the seals. |
|
| HYDRAULIC FLUIDS (Application: Hydraulic System) |
| |
- CONDAT D46 and CONDAT D68
- HYDROLUB ZS 46 / 48
- HYDROLUB S 46 / 48
| |
| CONDAT D46 and CONDAT D68 - Biodegradable, Fire Resistant, HFDU type |
| |
| Biodegradable fluids, fire resistant and non polluting. They have the equivalent properties as mineral oils with which they are compatible and miscible. Condat’s D46 and D68 have been approved by Factory Mutual, which is a major reference for hydraulic fluids. |
| |
| HYDROLUB ZS 46 / 48 |
| |
| Oils of HM type have specific anti-oxidant, anti corrosion and high anti-wearing properties. |
| |
| HYDROLUB S 46 / 48 |
| |
| Oils of HV type have the same properties as Hydrolub ZS with a better viscosity index. |
|
|
| FLUIDS (Application: Gears) |
| |
| |
| MECANIC EP |
| |
| A range of extreme pressure mineral oils designed to lubricate all types of gears and bearings subject to high pressure and stress. |
| |
| G-TRANS 80W90 |
| |
| Mineral oil for the lubrication of mechanical transmissions – very good protection against wear and high thermal stability, even under onerous conditions. |
|
|
| GREASES (Application: Main bearing / Centralised lubrication) |
| |
- GR 217 Range
- GR 130 EP Range
- KALITH EP
- EXTRA STABIL EP
| |
| GR 217 Range - Biodegradable and Fire resistant |
| |
| Multipurpose, biodegradable, non toxic and fire resistant greases. High resistance to water, temperature extremes and pressures. |
| |
| GR 130 EP Range |
| |
| Multipurpose greases. High resistance to water, temperature extremes and pressures. |
| |
| KALITH EP |
| |
| Multipurpose grease with extreme pressure and anti-wear properties. High resistance to water and water wash-out with excellent adhesion to obtain maximum water tightness. |
| |
| EXTRA STABIL EP |
| |
| Extreme pressure and anti-wearing grease with high pumpability. It is very well adapted to centralised greasing systems using small diameter pipes. |
|
|
| Ground Conditioning |
| |
| FOAM (Application: EPB TBM / Micro-tunnelling / Back-actor TBM {pressurised face}) |
| |
| CLB F4 Range |
| |
| Biodegradable and non-toxic foaming agent, suitable for any environmental situation. The generated foam, injected at the face of the machine, allows ground treatment whilst boring and thus enhances machine performance. It reduces the permeability of the ground to eliminate air losses and aids the extraction of spoil through the machine. |
| |
| ADDITIVE (Application: All TBM) |
| |
| A complete range of polymers for anti-sticking, sliding and anti-wear solution. |
| |
|
|
| CONDAT has developed a specific range of products for the Mining industry. |
| |
| All of these products are compliant with the latest safety and environmental standards. |
| |
| HYDRAULIC FLUIDS |
| |
| Application: Hydraulic System |
| |
| CONDAT D46 and CONDAT D68 - Biodegradable, Fire Resistant, HFDU type |
| |
| Biodegradable fluids, fire resistant. They have the equivalent properties as mineral oils with which they are compatible and miscible. Condat’s D46 and D68 have been approved by Factory Mutual, which is a major reference for hydraulic fluids. |
| |
| CONDAT FLUID SH4B - Application: Longwall Mining |
| |
| Condat SH4B is a concentrate hydraulic fluid micro emulsion type, and is added with the water in the hydraulic cylinders. It has good anti foam properties and a great stability regardless of the hardness of the water. |
| |
| GREASES |
| |
| Application: Conveyor Lubrication |
| |
| GR 217 Range - Biodegradable and Fire Resistant |
| |
| Multipurpose, biodegradable, non-toxic and fire resistant greases. High resistance to water, temperature extremes and pressures. It uses solid lubricant additives. Will not pollute the soil. |
|
 |
| Info and images provided by: Condat |
